NEW PRODUCTS
Senva UL Listed TG Series sensors can be ordered as individual CO or NO2 sensors or as a combination of CO&NO2 sensors in a shared enclosure. CO and NO2 sensor components are listed to UL2075. The analog output model features 2 outputs that support daisy chain wiring - multiple sensors may be used in a parallel sequence (0-10V) for cost effective coverage of large areas. The unit can also act as a stand alone controller, utilizing the relay for exhaust fan operation or the output for direct control of a VFD. The BACnet/Modbus model supports BACnet MS/TP & Modbus network communication in one unit. Standard features include network auto-configuration, a programmable fan relay, LED indicators, integrated display and audible alarm.
TG UL Combustibles Wall & Duct
Senva TG Series sensors can be ordered as individual CH4 sensor, C3H8 sensor, H2 sensor, O2 sensor, H2S sensor, or specify two sensing elements in one enclosure including CO and NO2. The analog output model features 2 outputs that support daisy chain wiring - multiple sensors may be used in a parallel sequence (0-10V) for cost effective coverage of large areas. The unit can also act as a stand alone controller, utilizing the relay for exhaust fan operation or the output for direct control of a VFD. Order the NEW fail-open relay version for streamlined integration into fire control panels. The BACnet/Modbus model supports BACnet MS/TP & Modbus network communication in one unit. Standard features include network auto-configuration, a programmable two-staged relays, LED indicators, integrated display and audible alarm.
Senva TG Series refrigerant sensors are a great solution for refrigerant leak detection in many applications. It can be ordered as individually calibrated R134A or R410A sensors or any combination with CO or NO2 sensors. Buy pre-calibrated for R134A or R410A or factory calibrate to any refrigerant including R134A, R410A, R407C, R404A, R22, R123. The analog output model features 2 outputs that support daisy chain wiring - multiple sensors may be used in a parallel sequence (0-10V) for cost-effective coverage of large areas. The unit can also act as a stand-alone controller, utilizing the relay for exhaust fan operation or the output for direct control of a VFD. The BACnet/Modbus model supports one unit of MS/TP & Modbus network communication. Standard features include network auto-configuration, a programmable fan relay, LED indicators, an integrated display, and an audible alarm.
Senva TGR Series sensors can be ordered as individual CO or NO2 sensors or as a combination CO/NO2 sensor in a shared enclosure. Choose up to two from a variety of refrigerant gases, combustibles, or Carbon Monoxide for a combination of air quality and toxic gas detection. The analog output model features 2 outputs that support daisy chain wiring - multiple sensors may be used in a parallel sequence (0-10V) for cost effective coverage of large areas. The unit can also act as a stand alone controller, utilizing the relay for exhaust fan operation or the output for direct control of a VFD. The BACnet/Modbus model supports BACnet MS/TP & Modbus network communication in one unit. Standard features include a programmable fan relay, LED indicators, integrated display and audible alarm.
TotalSense PM/VOC/CO2/RH/T/TotalSense PIR Wall
The TotalSense Series provides more data for more advanced ventilation control while drastically reducing installation cost and time on a project. It includes a comprehensive selection of IAQ sensing with carbon dioxide (CO2), relative humidity (RH), and temperature plus options for occupancy detection (PIR), total volatile organic compounds (TVOC), particulate matter (PM), Carbon Monoxide (CO), and ambient light. More than an IAQ sensor, it’s the first fully configurable Indoor Environmental Quality (IEQ) sensor matrix. Motion detection (PIR) can initiate ventilation upon occupancy, providing air exchanges the instant people are present, allowing for cleaner and safer indoor spaces while still saving energy.
TotalSense CO2/RH/T/TotalSense PIR Wall
The TotalSense Series provides more data for more advanced ventilation control while drastically reducing installation costs and time on a project. It includes a comprehensive selection of IAQ sensing with carbon dioxide (CO2), relative humidity (RH), and temperature plus options for occupancy detection (PIR), total volatile organic compounds (TVOC), particulate matter (PM), Carbon Monoxide (CO), and ambient light. More than an IAQ sensor, it’s the first fully configurable Indoor Environmental Quality (IEQ) sensor matrix. Motion detection (PIR) can initiate ventilation upon occupancy, providing air exchanges the instant people are present, allowing for cleaner and safer indoor spaces while still saving energy.
TotalSense PM/VOC/CO2/RH/TotalSense Duct
The TotalSense Series Duct AQ sensor provides more data for more advanced ventilation control while drastically reducing installation cost and time on a project. It includes a comprehensive selection of AQ sensing with carbon dioxide (CO2), relative humidity (RH), and temperature plus options for total volatile organic compounds (TVOC), barometric pressure and particulate matter (PM).
TotalSense PM/VOC/CO2/RH/TotalSense Outdoor
The TotalSense Series Outdoor AQ sensor provides more data for more advanced ventilation control while drastically reducing installation cost and time on a project. It includes a comprehensive selection of AQ sensing with carbon dioxide (CO2), relative humidity (RH), and temperature plus options for total volatile organic compounds (TVOC), barometric pressure and particulate matter (PM). This sensor is enclosed in an outdoor rated enclosure to protect electronics from rain, overhead watering systems and harmful UV rays.
AQ2 TotalSense RH/T/TotalSense PIR Wall
The TotalSense Humidity version is designed for quick-installation and complete flexibility. With options for analog or BACnet/Modbus connectivity, four display options, various thermistors, sliders, and pushbuttons, it can be configured for any job. Motion detection (PIR) can initiate ventilation upon occupancy, providing air exchanges the instant people are present (in addition to monitored elevated CO2 levels.) This technology provides a much faster trigger for ventilation allowing for cleaner and safer indoor spaces while still saving energy. PIR and ambient light sensors can also be utilized for light harvesting for additional energy savings and code compliance. The TotalSense Series also includes a comprehensive selection of IAQ sensors. For options including CO2, TVOC, or PM, see the "indoor air quality" section.
The EMX Advanced is the most user-friendly and quick installation True RMS energy meter on the market. Its line is powered with a color OLED screen and data-rich user interface, making setup as easy as L1, L2, L3. Equipped with both pulse and RS485 outputs, the EMX Advanced can connect to almost any metering or control device. Ideal for retrofits, the EMX accepts any 0.333V CT or standard metering Rogowski coil with no need for time-consuming and bulky integrators. Mixed or match loads or CT sizes!
The newly improved WD-1 detector is the smallest water detector on the market, designed to detect water in even the tightest spaces. The WD Series is a fully encapsulated low-pressure molding that is water resistant and can safely be submerged for extended periods of time. Its gold-plated sensing probes are strategically positioned for optimal sensitivity to leaks, making it ideal for spot leak detection in various environments, including data centers, critical equipment areas, restrooms, and commercial kitchens. More features. Better value.
This a compact communicating device for your API, cloud storage, and communication applications. Convert any Modbus RTU or analog signal to Ethernet, Power Over Ethernet (POE), or 2.4 GHz wireless (Wifi) and connect to IOT cloud services (AWS, Azure, MQTT). This connection also allows for local BACnet/IP or Modbus/TCP point hosting via the local IP network. Its small profile and low power requirements allow for field mounting in device enclosures or junction boxes. Use pre-configured sensor data for Senva sensors for fast configuration.