Page 93 - 2020 Catalog

AIR QUALITY

ZipSeal Conduit Sealant
TM

Duct sealing system to protect sensors from water
intrusion and conduit reverse venting

DESCRIPTION APPLICATIONS

Prevents water intrusion in CO/NO2 sensors that may occur from ▪ Protects CO/NO2 sensors from condensation
warm moisture condensing in conduit and draining into top and water damage
of sensor body, potentially damaging the sensor. Also prevent ▪ Prevents back venting into sensor which can
impair readings
airflow intrusion from conduit which can cause faulty readings. ▪ Installs in just 45 seconds--save on labor
Recommended for seaing both top and bottom conduit entries. ▪ Re-enterable – easily removed.
▪ Multiple Seals – One kit seals up to five
The unique two-part foam installs quickly and effectively. The 2-inch/50 mm conduits.
innovative design of the Zip-Disc™ insert allows for horizontal ▪ Meets NEC Code Requirements – 2011 NEC
and vertical installation with minimal drippage. Cured foam Articles 225.27, 230.8, 300.5 (G), 300.7 (A), on
blocks can be removed and re-entered relatively quickly if Raceway Seals, 501.15 (B)(2).
necessary. ZipSeal™ Duct Sealant holds up to 10 feet (3.0 m) ▪ Meets Industry Standards – Complies with
water-head pressure. TIA-758-B Standard 5.1.1.2.8, 5.4.2.3, and
7.4.2.8.1 Sealing Ducts.
ZipSeal™ Duct Sealant holds up to 10 feet (3.0 m) water-head
pressure to keep gases and rodents out of conduits.

ORDERING INFORMATION

1 - 50-mL cartridge; 2 - mixing nozzles;
ZIP-50KIT1 2 - pairs of gloves; 5 - 2-in/5-cm Zip-Discs
1 - instruction sheet
ZIP-KIT1G Same as kit above, includes TOOL-50-11
ZIP-50KITB6 6 - ZIP-50KIT1

TOOL-50-11 Dispensing tool for 50-mL cartridge
ZIP-50KIT1G components MXR-20T-10 10-pack mixing nozzles

Higher Reliability, Faster Installation, Superior Accuracy | Sense the difference | 93